Trinity Sales & Services
Home Products Contact Us Online Quote
Vehicle Scanners
Battery Tester & Analyzer
Wheel Alignment Machines
Wheel Balancers
Tyre Changers
Nitrogen & Air Inflators
RIM Straightener
Vehicle Lifts
MPFI & CRDI Fuel Injector Cleaners And Testors
PUC Machines( Petrol & Diesel)
Car Washers
Industrial Vaccumm Cleaners (Wet And Dry)
Vehicle Refrigerant Recycling Equipments
Head Beam Aligners
Paint Booths
Infrared Paint Dryers
Vehicle Body Weilding Machines
Spot Weilding Machines
Dent Removing Equipments
Collision Repair Sysytem
Brake & Clutch Oil Bleeders
Oil Lube And Greasing Equipments
Compressors
Hydraulic Jacks
Tools Trolleys
Pneumatic Tools And Accessories
Hand Tools & Hydrailic Equipments
Two Wheeler Tools And Equipments
Car Performance & Detailing Products
Vehicle Electric Equipments
Other Products
Wheel Alignment Machines
Computerised PC Base Wheel Aligner
Features
  • The equipment comes equipped with a computer, 15½ VGA monitor, key-board, 3.5½ floppy disk drive, 2 or 4 sensor (measuring heads), a large storage cabinet, 80 column printer, infrared cordless remote control, turntables, sensor holders & other related parts.
  • Suitable for all cars and LCV's (additional accessories required for HCV alignment.)
  • Over 3000 target value memory locations with menu.
  • Theoretical reference data capacity for up to 10,000 vehicles in the memory.
  • An archive for calling up earlier measured data in the event of customer complaints.
  • Permanent system monitoring even during the measuring process.
  • Automatic fault display and on-line help button for all measuring and system functions.
  • All front and rear-wheel value for the measured-value printout are calculated in a single wheel alignment run.
  • Cordless remote control provided to enable the operator to operator the m/c from the steering wheel.
  • Live castor adjustment and simultaneous display of castor, camber and toe readings on one single screen.
  • 24 value measured from the steering wheel-rapidly and precisely with PC technology.
  • Automatic wheel run out display prevents incorrect measurements. Four point run out compensation for higher accuracy.

Technical Data

Display 15½ colour screen with high resolution graphics
Display resolution unlimited reference value input in degrees/minutes, degree/fractions, mm/decimals, mm/fractions, inches/decimals, inches/fraction
Wheel size range 10½ - 20½
Measuring range with accuracy +- 10 with +- 10'
Total toe +- 5 with +- 5'
Individual toe +- 8 with +- 8'
Camber +- 5 with +- 5'
Driving Axis Angle +- 18 with +- 10'
Castor +- 18 with +- 10'
Kingpin Inclination +- 5 with +- 5'
Wheel setback +- 5 with +- 5'
Toe out on turns at 20 steering lock +- 5 with +- 5'
Full Wheel lock +- 60 with +- 10'
Castor angle adjustment range +- 10
Load capacity of turntables 600 Kgs.
Load capacity of sliding support 600 Kgs.
Power supply 220V, 1 Phase
CCD WHEEL ALIGNER

MODEL ESCORT 7000

1. Latest version of Bluetooth/Zigbee wireless communication system;
2. 8-beam CCD optical sensors;
3. High accuracy inclinometer from VTI of Finland;
4. Caster measurement directly and no turn-table reading need;
5. Sensors can be exchanged single-to-single without debugging;
6. Electronic-level display;
7. The sensors can work continuously for nearly 18 hours with the 1800mA batteries;
8. Ten thousand types of vehicle data which can be updated and edited conveniently;
9. The software is easy to use with the full functions and high reaction speed;
10. Linux, Winxp or Vista operating systems supported;
parameter accuracy range
Toe angle 0.03 20
Single toe angle 0.01 10
Camber angle 0.02 15
Trust angle &set back 0.02 9
Kingpin caster angle 0.05 18
Kingpin inclination angle 0.05 18
Steering angle 0.1 24

Leaser Wheel Alignment System

Product Code : LA-30

  • The most precise & fastest wheel alignment system.
  • Using a perfect beams of Leaser lights and a series of optically accurate concentric mirrors to make precise measurements of wheel runout, castor, camber and toe, it helps to perform two and four wheel alignments.
  • Easy-to-use system is up and running with simple operator instructions and requires almost zero maintenance.
  • It can handle all Passenger Cars, SUV's Light Trucks, & Heavy Trucks.
Wheel Aligner

Product Code : exact

Wheel Aligner :

Our Wheel Aligner comes equiped with a computer, 15'' LCD color monitor, key-board, 2 or 4 sensor (measuring heads), a large storage cabinet, 80 column printer, infrared cordless remote control, turntables, sensor holders & other related parts.

Features of Wheel Aligner :

  • Suitable for all cars & LCV's (additional accessories required for HCV alignment.)
  • Over 3000 target value memory locations with menu.
  • Theoretical reference data capacity for upto  10,000 vehicles in the memory.
  • An archive for calling up earlier measured data in the event of customer complaints.
  • Parmanent system monitoring even during the measuring process.
  • Automatic fault display & on-line help button for all measuring and system functions.
  • All front & rear-wheel value for the measured-value printout are calculated in a single wheel alignment run.
  • Cordless remote control provided to enable the operator to operator the m/c from the steering wheel.
  • Live castor adjustment & simultaneous display of castor, camber & toe readings on one single screen.
  • 24 value measured from the steering wheel-rapidly & precisely with PC technology.
  • Automatic wheel run out display prevents incorrect measurements. Four point run out compensation for higher accuracy.
  • Alignment data display in figures and graphic form]

Technical data :

Display 15� colour screen with high resolution graphics
Display resolution Unlimited reference value input in degrees / minutes, degree / fractions, mm / decimals, mm / fractions, inches / decimals, inches / fraction
Wheel size range 10� - 20�

Measuring Range With Accuracy :

Total toe ±10° with ±10'
Individual toe ±5° with ±5'
Camber ±8° with ±8'
Driving Axis Angle ±5° with ±5'
Castor ±18° with ±10'
Kingpin Inclination ±18° with ±10'
Wheel setback ±5° with ±5'
Toe out on turns at 20 Steering Lock ±5° with ±5'
Full Wheel Lock ±60° with ±10'
Castor angle adjustment range ±10°
Load capacity of Turntables 600 Kgs.
Load capacity of Sliding Support 600 kgs.
Power supply 220V, 1 Phase
 
CCD WHEEL ALIGNER

4*8 CCD WHEEL ALIGNER( BLUETOOTH) : MODEL : CAMIA 350

General features

 Ã¢â‚¬Â¢  Win-XP Operaing system
•  Vehicle specification - 30 years
•  Custom Management program
•  Multiple Language
•  Vehicle specification Write program
•  Voice announce

Operator Efficiency

Integrated HELP System
3-D Animation
Custom Database Back-up
Multiple Printer Format
Multiple Unit of Measure
E-Z Toe
Total Jack-up (2-post lift useable)
Camber Jack-up
Frozen Caster & SAI

It will show vehicles's condition in Animation & Voice.

 
3D wheel Aligner

Do more alignments in less time with the TRINITY Wheel Aligner. The 3D Wheel Aligner features continuous measurement of camber, caster and toe. Live on-screen displays eliminate the need for time-consuming re-measurement procedures. This aligner is a great choice for new start-up shops.

This proven technology is matched with easy-to-use software that will have your technicians getting readings in a matter of minutes.

The 3D Wheel aligner series will enable you to :

· Make more of your technicians alignment experts
· Generate more alignment business
· Eliminate comebacks
· Make More Money!

Technical Specification

Wheel Size 13" - 24"
Tire Diameter Unlimited
Track Width 48" - 96"
Wheelbase 79" - 180"
Power Requirements 120/230V, 1Ph, 60HZ

Measuring Item

measuring item accuracy measuring range
display accuracy 1′/1mm  
camber ±2′ ±10°
caster ±6′ ±20°
king pin inclination ±6′ ±20°
toe-in angle ±2′ ±20°
setback ±2′ ±5°
thrust angle ±2′ ±5°
wheel deviation ±2mm  
axis deviations ±2mm  

Software Functions

1. Standard function:

 parameter measurement on camber,caster,king pin inclination, toe-in angle, setback, thrust angle and so on.

2. Extensive function:

axis deviation measurement, wheel deviation measurement, single-wheel dynamic measurement, vehicle lift function measurement, steering wheel aligning measurement, inspection on lift level.

3. Optional function:

 Video guiding (match with exclusive camera) , dismantling tyre measurement function (match with wheel rim adapter)

Features:

1. 3D dynamic measurement based on auto body is not influenced by lift platform, meets auto real value well.

2. Measurement system equipped with double digital cameras and four target plate, supplying revolutionary measurement mode.

3. There is no electronic component, so the wheel alignment will not have a component failure problem.

4. Equipment Calibration: once calibration before ex-factory, workable immediately after installation, no need for periodic calibration

5. Measurement progress: no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth

6. Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners

7. Easily maintenance, download and upgrade freely for the model data

8. Compile customers’ name, license plate and other information for checkout easily

 
 
Online Quote
Please fill the below form to get an online quotation.
Name  
Co. Name *  
Tel/Mobile *  
Email  
City*  
State*  
Product Interested IN

Vehicle Scanner

Battery Tester & Analyzer

Wheel Alignment Machine

Wheel Balancers

Tyre Changers

Nitrogen & Air Inflators

RIM Straightener

Vehicle Lifts

MPFI & CRDI Fuel Injector Cleaners And Testors

PUC Machines

Car Washers

Industrial Vaccumm Cleaners

Vehicle Refrigerant Recycling Equipments

Head Beam Aligners

Paint Booths

Infrared Paint Dryers

Vehicle Body Weilding Machines

Spot Weilding Machines

Dent Removing Equipments

Collision Repair Sysytem

Brake & Clutch Oil Bleeders

Oil Lube & Greasing Equipments

Compressors

Hydraulic Jacks

Tools Trolleys

Pneumatic Tools & Accessories

Hand Tools & Hydrailic Equipments

Two Wheeler Tools And Equipments

Car Performance & Detailing Products

Vehicle Electric Equipments

Message  
   
  
Contact Us
TRINITY SALES & SERVICES
Mr. Tushar Yogesh Parmar
(Director)
Unit No 5, 6 ,7 Gulmohar Bldng., Agarwal
Greenways Complex, Mahajanwadi.
Near Dahisar Check Naka and Near Thakur Mall.
Mira Road East Dist : Thane 401104
Phone : +91-22-28969187 / 9255
     
Mobile : 9833268605/ 9322278159/ 9819610981
Email : sales@autoonetrinity.com
 
Hyderabad office
MBL IMPEX PVT LTD
20/RT, Lane No 2, street No 5
Prakash Nagar, Begumpet
Hyderabad - 500016
Phone : +914064596636, +914064551915
     
Mobile : +919885544182,+919347111133
© Copyright Trinity Sales & Services - 2011. All rights reserved. Privacy Policy
Please fill the below form to get an online quotation.
Name  
Co. Name *  
Tel/Mobile *  
Email  
City*  
State*  
Product Interested IN

Vehicle Scanner

Battery Tester & Analyzer

Wheel Alignment Machine

Wheel Balancers

Tyre Changers

Nitrogen & Air Inflators

RIM Straightener

Vehicle Lifts

MPFI & CRDI Fuel Injector Cleaners And Testors

PUC Machines

Car Washers

Industrial Vaccumm Cleaners

Vehicle Refrigerant Recycling Equipments

Head Beam Aligners

Paint Booths

Infrared Paint Dryers

Vehicle Body Weilding Machines

Spot Weilding Machines

Dent Removing Equipments

Collision Repair Sysytem

Brake & Clutch Oil Bleeders

Oil Lube & Greasing Equipments

Compressors

Hydraulic Jacks

Tools Trolleys

Pneumatic Tools & Accessories

Hand Tools & Hydrailic Equipments

Two Wheeler Tools And Equipments

Car Performance & Detailing Products

Vehicle Electric Equipments

Message  
   
  
Please fill the below form to get an online quotation.
Subject  
     
Tele. / Mobile  
Email *  
Message  
   
  
Please fill the below form to get an online quotation.
Your Name  
Tele. / Mobile  
Email *  
Message